Fith Ops Gen3 vs Gen4 Perimeter Trip Alarms

WHAT'S THE DIFFERENCE?

FITH OPS DEVICE COMPARISON

GEN3 PERIMETER TRIP ALARM

The Gen3 has a slide in breach that holds 12 gauge blanks, or any of our adapters, into the device from the side as shown in this image. Blanks are secured in place with a precision detent.

Some users will find this version more convenient when compared to the "Multi-Use Rescue" alarm shown below.

COMPATIBILITY:works with 12 gauge blanks, and our .22 adapter, 209 primer and 308 adapter.

GEN 4 2-IN-1 PERIMETER TRIP & RESCUE ALARM

The Gen4 has a load collar that screw-ons to the device. It holds the blanks/adapters in place, allowing the user to launch a rescue flare by hand for an emergency rescue.

The Gen4 can also be used to set a tripwire perimeter, just like the classic design.

COMPATIBILITY:works with 12 gauge blanks and flares, plus our .22 adapter, 209 primer and digital adapters. NOT COMPATIBLE with our 308 adapter.

NOTE: Avoid using blanks with brass hulls. Brass hull mushrooms out after detonating. Removing a mushroomed blank is difficult.